Radiodetection TX-10B 10 Watt Transmitter with Bluetooth
Our Livechat team is currently unavailable. Please use the “Contact Us” option under “Support” or try again during our hours of Livechat operation:
8:00 AM to 6:00 PM EST
Radiodetection’s Tx-10B is a ten-watt multi-function signal transmitter designed to complement the advanced cable and pipe locators like the RD7200, RD8200, RD8200G, and RD8100 Marker Locators. It is a versatile transmitter that can be customized to match your chosen locator using the “model” feature.
iLOC Remote Control
With iLOC, you can control the locate signal’s power and frequency from up to 1400’ / 450m away using a Bluetooth link between the RD8100 locator and transmitter. This feature saves time walking and improves efficiency on the site.
90V Maximum Output
The high voltage output of the Tx-10B allows you to locate even high impedance lines like telephone pairs, ensuring that you can get locatable signals on any line.
The Tx-10B transmitter features a fault-finding capability that applies a fault-find signal and detects insulation faults using an accessory A-frame to pinpoint faults.
This feature recommends a general-purpose locate frequency for the intended locate task by measuring the impedance of the target cable or pipe. It improves locate accuracy and extends battery life.
Automatic Impedance Matching
This feature matches the transmitter impedance to that of the target cable automatically, transmitting the locate signal as far as possible.
Built for Use - IP65
The Tx-10B transmitter is built to last with a shock-resistant and ingress-protected casing that protects against knocks, drops, water, and dust.
The ECO mode enables alkaline battery life extension by gradually reducing the power output and providing audio and visual warnings when the transmitter detects a low battery condition.
This function allows you to measure output voltage, line voltage, current, impedance, and power and characterize faults on the target line before starting a survey.
The Bluetooth feature enables you to change transmitter frequencies from a distance, saving you time walking back and forth.
Using a 4 kHz frequency, this feature enables you to use CD to identify a target line on higher impedance cables like telephone cables, electric and CATV.
- Transmitters: Tx-10B
- Max. Output Power: 10W
- Active Frequencies: 36
- Induction frequencies: 8
- Current Direction Frequencies: 14
- iLOC remote control: Yes
- Fault Find: Yes
- Induction field strength 1
- Eco Mode: Available, disabled by default
- Lithium-Ion Battery: Option
- 3 year warranty on registration*: Yes
|Alk: 4 hours NI-Mh: 7 hours Li-Ion: 8 hours
|-20°C to 50°C
|8x D cells / Custom Lithium-Ion (Li-Ion)
|LCD with auto backlight.